| | |
| C-Series Tango Heated Humidifier |
|
|
Manufacturer: Resmed
Part Number: 34900
The C-Series was developed as an integrated, easy-to-use heated humidification system. Designed to deliver humidity to your passage ways during CPAP therapy. This device easily attaches to the C-Series CPAP using a latch system.
The C-Series Heated Humidifier is easy-to-set-up and offers:
- Unique, tubeless design that works with the new C-Series CPAP.
- Simple C-Series adapter seal provides secure contact between the water chamber and the CPAP.
- Clear water chamber that's easy to fill and easy to remove.
- A lighted humidifier control button on the CPAP unit makes adjusting humidification levels easy.
- The Heated Humidifier plugs directly into the C-Series CPAP- so there is only one plug going from the CPAP to the wall outlet.
|  |
| Please note that the cpap pictures on this page are not included with the product, but are used for illustration. |
| |
| Operating Temperature |
41°F to 104°F (5°C to 40°C) |
| Storage Temperature: |
-4°F to 140°F (-20°C to 60°C) |
| Relative Humidity |
15 to 95% (non-condensing) |
| Atmospheric Pressure Range: |
1060 hPa (sea level) to 680 hPa (8500’/ 2591 m) |
| Dimensions:
| 3.4” x 7.5” x 16” (87mm x 189mm x 409mm) |
| Weight: |
2 lbs |
| Water Capacity |
375 mL |
| Standards Compliance |
Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential, commercial and light industry
environments |
| | c p a p p r o | |
|
